【USA】Dental Orthodontic Adhesive Kit /Mini/No-Mix Bonding/Light Cure/Blue Glue

Description

INDICATIONS FOR USE:
Direct restoration for all class caries.
Restoration of teeth defect and veneer.
Package:
REFILL:
Light Cure Composite: 4g/Syringe*5
Syringe Needles : 5pcs/ box*1
Total Etching Adhesive: 5ml/Bottle*1
Etching Gel: 2.5ml/Syringe*1
Applicators Brushes: 20pcs/box*1
Net weight: 188.4g
COLOR: A1,A2,A3,A3.5,B1
FEATURES & ADVANTAGES:
Unique dispersion technology ensure the filler
evenly distributed
Radioopaque and fluoride releasing Optimal
polishability and high shade stability.
Excellent handling, not sticky to instrument;
Suitable for most cases of restoration, extensive
indication of usage.
INSTRUCTIONS
：
(1)Preparation: isolate and prepare tooth.
(2)Cleaning: rinse the preparation with water.
(3)Drying: gently air dry until there is no visible
water.Do not allow enamel or dentin to dry for an excessive period of time.
(4)Applying Dentex Self-Etching Light Cure Adhesive
(DSA):
dispense 1-2 drops of DSA into a mixing well, apply
enough DSA to the entire preparation with a little brush until a shiny surface
is achieved and then wait for 10 seconds (DSA should not be applied too much ).
Use a gentle stream of air to evaporate the solvent for 5 seconds. (If using a
non self-etching adhesive, an etching step should be used according to the
manufacturer’s instruction).
(5)Cure: light cure for 20 seconds at 500±50mW/cm2.
Keep the distance to exposure surface less than 4 mm.
(6)Applying Dentex light cure composite (DLC): place
selected DLC into cavity preparation following by light cure. According to
following table, the curing time is recommended for different depth and color
shades. In order to reduce shrinkage stress, for a large cavity, an increment
filling is recommended. In general, 1-2 mm increments are placed into cavity
preparation from different sides and the restoration is built incrementally.
Each increment is light cured for 30 seconds.
(7) Finishing: after light cure, adjust restoration.
(8) Polishing: use polishing strip or disc to polish
the surface
WARNING:
Do not use this product for patient who is allergy
to methylmethacrylate. Do not use this product with any material contained
eugenol.
PRECAUTIONS:
Methmethacrylate resins may cause skin sensitization
in susceptible persons. In case of contact, wash skin with soap and water. In
severe situation, get medical attention.
ATTENTION:
To an exposed pulp, a pulp capping material such as
Calcium hydroxide may be used before using this product.
STORAGE:
Store at 25
℃
or less in a cool and dry place and avoid direct sun exposure.
Recap the syringe after use.
DISPOSAL:
After the product is used up, dispose it as normal
medical rubbish.
SHELF LIFE: 3 years
&
Description:
Orthodontic Adhesive: Designed for bonding of metal
and ceramic brackets on enamel.
It is of high viscosity and thus prevents bracket
drifting and reduces material waste.
As it is light cured extra working time is ensured
and therefore accurate bracket placement can be obtained.
INDICATIONS FOR USE: Direct bonding of metal and
ceramic brackets
Packing list:
Enamel Adhesive Primer(Total-Etching) 5ml*1 bottle;
Etching Gel 5ml*1 syringe;
Light Cure Adhesive Paste 4g*3 syringe;
Little brush 20;
Syringe tip:10
STORAGE:
Store at 25
℃
or less in a cool and dry place and avoid direct sun exposure. Recap
the syringe after use.
&
Specifications:
1. This product is one kind of orthodontic direct
bonding system resin with aromatic bis dimethyl acrylate resin as its main
material.
2. As a new-type orthodontic direct bonding system,
it is convenient to use with little waste, easy to handle independently and has
a favorable clinical bonding strength.
3. It consists of primer and paste with acid
etchant, spatulas and small brusher as its accessories.
Preparation: Clean tooth enamel surface,eliminate
tooth contamination,rinse then isolate tooth and blow-dry.
Etching:Etching the enamel of the tooth with acid
etchant for 50 or 60 sec. Rinse and dry with clean air. If the enamel does not
have a chalky appearance, pls. repeat the process;
Brushing: apply a thin layer of the primer over the
etched enamel with the brusher;
Bonding: apply another thin layer of the paste to
seal the edges, adjust the bracket within 20 sec, give pressure for 5 to 10
secand remove the excessive primer and paste after 40 to 60 sec; then do
orthodontic procedures followed 5-min curing.
Packaging Detail:
3 x black syringes (3.5g)
1 x primer bottle (10ml)
20 x Brushes
&
Warning:
Ortho-Bonding primer and adhesive contains acrylate
monomers. Acrylate monomers are known to produce allergic skin reactions in
certain sensitive individuals. May cause eye and skin irritation.
Precautions: A void eye and skin contact. Wear
gloves when handing this material.
Precaution:Please follow manufacturer’s directions
on the handing, proper use and recommendations for eye protection, when using a
curing light
This system is designed to be used at room
temperature (20-25°C, 68-77°F)
。
Storage between
2-27°C/35-80°F Light Sensitive
Contents:
3 x Adhesive paste Syringes (10.5g)
1 x Primer Bottle (8ml)
40 x Brushes
1 x Instruction Booklet
&
Specifications:
1. This product is one kind of orthodontic direct
bonding system resin with aromatic bis dimethyl acrylate resin as its main
material.
2. As a new-type orthodontic direct bonding system,
it is convenient to use with little waste, easy to handle independently and has
a favorable clinical bonding strength.
3. It consists of primer and paste with acid
etchant, spatulas and small brusher as its accessories.
Preparation: Clean tooth enamel surface,eliminate
tooth contamination,rinse then isolate tooth and blow-dry.
Etching:Etching the enamel of the tooth with acid
etchant for 50 or 60 sec. Rinse and dry with clean air. If the enamel does not
have a chalky appearance, pls. repeat the process;
Brushing: apply a thin layer of the primer over the
etched enamel with the brusher;
Packaging Detail:
1 x bottle
（
3ml
）
Primer
1 x Syringes (3.5g each)Paste
1x Syringes (2.5ml)etchant Gel
7x Brushes
1xSyringe tip
STORAGE:
Store at 25
℃
or less in a cool and dry place and avoid direct sun exposure. Recap
the syringe after use.
&
Description:
Orthodontic Adhesive: Designed for bonding of metal
and ceramic brackets on enamel.
It is of high viscosity and thus prevents bracket
drifting and reduces material waste.
As it is light cured extra working time is ensured
and therefore accurate bracket placement can be obtained.
INDICATIONS FOR USE: Direct bonding of metal and
ceramic brackets
Feature:
This orthodontic adhesive provides a longer working
time and a rapid setting time. Can be placed directly into bands. Excess flash
is easy to clean up prior to the light curing and the cement is easy to see due
to the blue color.
It contains fluoride to reduce the chance of
declacification.
Packing list:
1 x Etchant acid Gel 2.5ml syringe;
1 xLight Cure Adhesive Paste 5g syringe;
1 x Syringe tip
Box size: 17*11*2.5cm
STORAGE:
Store at 25
℃
or less in a cool and dry place and avoid direct sun exposure. Recap
the syringe after use.
FDA Statement
The sale of this item may be subject to
regulation by the U.S. Food and Drug Administration and state and local
regulatory agencies. If so, you can bid
on this item only if you are an authorized purchaser. If the item is subject to
FDA regulation, I will verify your
status as an authorized purchaser of this item before shipping of the
item.
Seller name:Dentistryshop
City,State:SHENZHEN,China
Telephone number:0755-23998164
On Dec-20-20 at 22:18:41 PST, seller added the following information: