Deutsch
Español
Français
Italiano
Nederlands
English
Lot 2 Cherry E13 15A Normally Open Pushbutton Switches 125/250 VAC 0E1349EC NO
$4.74
463
- Brand: Cherry Electrical
- Return shipping will be paid by: Buyer
- All returns accepted: Returns Accepted
- MPN: 0E1349EC
- Refund will be given as: Money Back
- Item must be returned within: 30 Days
- Contact Configuration: Single Pole, Double Throw (SPDT)
- Model: E13
- Switch Action: Momentary
- Standards/Compliance: UL CSA
- Termination Type: 1/4" Quick Connect
- Number of Circuits: 1
- Current Type: AC
- Condition: New
- Contact Material: Silver-Cadmium Oxide
- Operation: Normally Open, Snap Action
Description
3470B4H.07
New Cherry 15 Amp, 125 Volt / 250 Volt, Normally Open, Button Type MicroSwitches, Part Number 0E1324EC, Item Number 0E1349EC. Each bid quantity is for a Lot of Two (2) Switches. You may bid / buy any number of lots, up to the total quantity available above.
These switches were purchased from an industrial liquidator earlier this year, and they were brand new in the original factory boxes. We repackaged them into 4-mil Ziplok bags for resale. These are nice sturdy switches for a multitude of applications. The contacts are Normally Open. That is to say, no current flows through them until the button is pressed. Press the button and the light comes on, electric motor starts running, etc.
Written on the switch
:
CHERRY
E13 P CHINA
(Underwriters Recognized certification mark)
15A 125 or 250 VAC
(CSA certification mark)
3/4 HP 125 VAC, 1-1/2 HP 250 VAC 51-02
According to the calipers
:
Overall length: 2.658″ / 67.52 mm
Length (excluding terminals): 1.865″ / 47.38 mm
Width: .652″ / 16.56 mm
Overall height: .839″ / 21.31 mm
Height (excluding button): .646″ / 16.42 mm
Mounting holes: #6 machine screws, spaced 1.000″ OC (on centers)
According to the manufacturer
:
E13 SERIES
Specifications
Temperature Rating: 105°C
Flammability Rating: UL94HB
Materials: — Case: General Purpose Phenolic
— Actuating Button: Thermoplastic Nylon
— Common Terminals: Brass
— Moving Blade: Brass
— Spring: Stainless Steel
— Contacts: Silver-Cadmium Oxide
UL1054 Rating: 15A, 125/250VAC; 3/4HP, 125VAC 1-1/2HP, 250VAC; 2A 48VDC
Terminals: Standard 0.250″ x 0.032″ (6.35mm x 0.81mm)
Mounting
— Recommended mounting screw: #6-32 round head
— Recommended torque on screw: 6 inch-lbs. max
— Recommended maximum torque for ferrule: 20 inch pounds
Maximum Operating Force (g): 425
Max. Pre-Travel inches (mm): 0.050 (1.27)
Operating Point inches (mm): 0.285 +/-0.020 (7.24 +/-0.51)
Min. Over-Travel inches (mm): 0.100 (2.54)
Max. Movement Differential inches (mm): 0.015 (0.38)
